Sorry, your browser doesn't support Java(tm).

AP-680

AP-680P

4 Stage RO system
Sediment prefilter
Carbon block prefilter
RO membrane (50, 75, or 100)
Post GAC filter
Faucet & installation kit
3.5 gal. Plastic tank & ball valve
Shipping dimension & weight:
44x42x43cm 10.4kgs

4 Stage RO system w/pump
Sediment prefilter
Carbon block prefilter
RO membrane (50, 75, or 100)
Post GAC filter
Booster pump 110/220V, 50/60Hz
Faucet & installation kit
3.5 gal. Plastic tank & ball valve
Shipping dimension & weight:
59x42x44cm 14.50kgs

DEMO-KIT

TRAVEL-KIT (TEST-KIT)

AIP-25: inline sediment filter
AIC-25: inline GAC filter
RO membrane (50, 75, or 100)
Booster pump 110/220V, 50/60Hz
DEMO case with laser printing
Shipping dimension & weight:
43x48x46cm 13kgs

4 Stage RO system
AIP-2: inline sediment filter
AIC-25: inline GAC filter
RO membrane (50, 75, or 100)
AIC-2: Post inline GAC filter sediment prefilter
Booster pump 110/220V, 50/60Hz with gauge
TDS meter & Chlorine test liquid & Electrolysis 
Precipitator
Shipping dimension & weight:
47x19x37cm 10kgs

FILMTECTM

1. 

Permeate flow and salt rejection based on the following test conditions:
250 ppm softened tap water, 77°F (25°C), 50 psig (3.4 bar), and 15% recovery.

2. 

Permeate flow rates for individual elements may vary +/-20%.

‧ Membrane Type : Polyamide Thin-Film Composite
‧ Maximum Operating Temperature : 113oF (45oC)
‧ Maximum Operating Pressure : 300 psig (21 bar)
‧ Maximum Feed Flow Rate : 2.0 gpm (7.6 lpm)
‧ pH Range, Continuous Operation : 2-11
‧ pH Range, Short-Term Cleaning (30 min.) : 1-12
‧ Maximum Feed Silt Density Index (SDI) : 5
‧ Free Chlorine Tolerance : <0.1 ppm

MODEL Permeate Flow 
Rate GPD 
(M3/d)
Stabilized Salt 
Rejection
(%) 
Minimum Salt 
Rejection
(%)
Applied Pressure 
Psig (bar) 
Shipping Dimension/ 
Weight
MBFT-50 50 (7.9) 98.0 96.0 50 (3.4) 25pcs/36x37x37cm/7.2kg
MBFT-75 75 (12) 98.0 96.0 50 (3.4) 25pcs/36x37x37cm/7.2kg
MBFT-100 100 (16) 90.0 90.0 50 (3.4) 25pcs/36x37x37cm/7.2kg